Technical Specifications and Product Data

Download Technical Specifications PDF
Download Product Data PDF
Download Product Brochure PDF

Product Technical Specifications

This section includes PVC panels for surface mounting.  Panels are fire rated.  This section includes proprietary and descriptive type specifications.  Edit to avoid conflicting requirements.  General

1.1                                       SECTION INCLUDES

A.                 [Surface] mounted PVC wall panels.

1.2                                       RELATED SECTIONS

List sections that specify installation of products directly associated with this section; indicate specific items.  Coordination between the work of mechanical and electrical sections and the text of this article, requires special consideration.

  1. Section 06 11 00 – Wood Blocking:  Blocking and shims attached to substrate to support, attached to a level plane.
  2. Section [______-____________]:  Placement of special anchors or inserts for supporting panels.
  3. Section 07 92 00 – Joint Sealants: Silicone sealant for perimeter edge seal.
  4. Section [______-____________]:  [Acoustic] partition system with head rails [attached to] [within] assembly.

1.3                                       REFERENCES

List reference standards that are included within the text of this section.  Edit the following as required for project conditions.

  1. ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials.
  2. ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
  3. ASTM G21 Resistance of Synthetic Polymeric Materials to Fungi
  4. CISCA (Ceilings & Interior Systems Contractors Association):

1.4                                       SUBMITTALS FOR REVIEW

Do not request submittals if drawings sufficiently describe the products of this section or if proprietary specifying techniques are used.  Include a requirement for shop drawings only when special project conditions exist or when reflected ceiling plans are not provided on the working drawings.

  1. Section 01 33 00:  Submission procedures.
  2. Product Data:  Provide data on PVC panel construction and cleaning instructions.

Include the following paragraph for submission of physical samples for selection of finish, colour, surface texture, etc.

  1. Panel Samples:  Submit [two] [____] samples of each size and color specified.

1.5                                       QUALITY ASSURANCE

1.6                                       PROJECT CONDITIONS

  1. Section 01 32 13:  Work scheduling.
  2. Sequence work to ensure ceilings are not installed:
    1. Until building is enclosed,
    2. Sufficient heat is provided,
    3. Dust generating activities have terminated, and
    4. Overhead work is completed, tested, and approved.

1.7                                       DELIVERY, STORAGE AND HANDLING

  1. Section 01 66 00 for storage and handling of materials.
  2. Deliver materials in manufacturer’s original, unopened, undamaged containers with identification labels intact.
  3. Store cartons laid flat, protected from exposure to sun, high temperatures and humidity conditions as recommended by the manufacturer.

1.8                                       EXTRA MATERIALS

  1. Section 01 78 46:  Extra materials.
  2. Provide to the Owner a quantity of [5] [____] percent of all panels provided, in each color, for the Work.

1.9                                       WARRANTY

  1. Warranty:  Refer to Section [01 78 00.] [________.]
  2. Limited Warranty:  Ten (10) years from product manufacturing defects.

Part 2                             Products

2.1                                       Wall PANELS

In the following paragraph, list the manufacturers acceptable for this project.  Edit the subsequent descriptive specifications to identify project requirements and to eliminate any conflict with specified manufacturer’s products.

  1. Manufacturers:
    • Monument PVC Panels, by Acoustic Ceiling Products (ACP), PO Box 1581, Appleton, WI, 54912-1581; Phone – Toll Free:  800-434-3750; Fax – Toll Free 800-434-3751; e-mail to: support@acpideas.com; Web site: www.acpideas.com.
    • Substitutions: [Refer to Section 01 62 00.] [Not permitted.]
  2. Material: 
  3. Finish:

Select the following texture and color.  Alternatively, these sub-paragraphs may be deleted and the ACP color code and description specified (which identifies both the texture and color).  If a variety of finishes will be used on this project, use a schedule in Part 3 to identify them.

  1. Matte Finish – Colors: Balkan, Carpathian, Etna, Dolomite, Mont Blanc, and Olympus
  2. Gloss Finish – Colors: Carpathian, Dolomite, Etna, Mont Blanc, and Olympus

Specify one of the following adhesives, if surface mounted panels are used, or if panels must be adhered.  The following adhesives are recommended by ACP.

  1. Adhesive:  Manus 75-AM HV, Loctite Power Grab Ultimate (white),
  2. Joint Sealant: Siltex 40,
  3. Include the notched trowel below if panels will be glued with a troweled adhesive.
  4. Tools:  Site-cutting tools, [and notched trowel] for installing panels.

Part 3                             Execution

3.1                                       EXAMINATION

  1. Section 01 71 00:  Verification of existing conditions before starting work.
  2. Verify that layout of panels will not interfere with other work.

3.2                                       INSTALLATION

  1. Install assembly in accordance with manufacturer’s instructions and as supplemented in this section.
  2. Cutting Panels:  Using a table saw or circular saw for cuts, and jig saw or hole saw for irregular cuts like around plumbing and fixtures.
  3. Surface Mounting:
    1. Prepare substrate surface by cleaning properly. (free of dust and organic material that may impede adhesion)
    2. Apply adhesive to substrate using a notched trowel or tube adhesive with proper coverage. 
    3. Install full panels, working across the room.
    4. Overlap tongue and groove tiles.
    5. Once completed, firmly press all wall panels to ensure proper adhesive bond.
  1. Perimeter Molding:
    • Caulk or finish edges with appropriate trim

3.3                                       SCHEDULE

END OF SECTION

Product Data Sheet

PRODUCT FEATURES

  • DESCRIPTION
    • Extruded PVC wall panels, with a variety of color and finishes.
  • BASIC USES / RELATED USES
    • Can simulate different organic surfaces such as concrete and stone.
    • Direct surface application.
    • Suitable spaces for application include restaurants, hotels, churches, historic buildings.
  • PRODUCT ATTRIBUTES AND CHARACTERISTICS
    • Tongue and groove configuration for surface mounting applications.
    • Flat and Gloss textures.
    • Finishes:
      • Pigmented with a variety of colors.
  • Tiles – Sizes:  Tiles -5mm (48 inches x 17 inch) 5mm (48-inch x 120 inch) 5mm (16– inch x 120 inch) 5mm (60 – inch x 48 inch) 5mm (60 – inch x 24 – inch) 5mm () (these are nominal dimensions, always consult with manufacture for exact dimensions) 
  • ENVIRONMENTAL
    • PVC site cuttings and unused pieces can be collected and recycled.
    • Product may be recycled upon final disposal.
  • SELECTION CRITERIA
    • Can be glued (surface).
    • Designed for walls where an organic look is desired.
  • APPLICABLE STANDARDS, RELATED REFERENCES
    • ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials.
    • Fire Performance: Per ASTM E 84
      • Flame spread 15, Class A
    • ASTM E331-00(2016), Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
    • ASTM G21 – Resistance of Synthetic Polymeric Materials to Fungi
  • PACKAGING, HANDLING, PROTECTION, AND DELIVERY INSTRUCTIONS
    • Deliver materials within original cartons and take care to handle and protect against unnecessary damages such as moisture, breakage, dirt, surface soiling, etc.
    • Allow all material components to acclimate to room temperatures before installation.
  • SPECIAL WARRANTY
    • Limited Warranty:  Ten (10) years from product manufacturing defects.
  • LIMITATIONS
    • Certain chemical solvents should be avoided, contact manufacturer for more information.
  • AVAILABILITY
    • Nationally and internationally.
  • COST
    • Refer to Acoustic Ceiling Products (ACP) and authorized representatives for pricing.

PRODUCT PROPERTIES

  • MATERIAL, COMPOSITION, AND DESIGN
    • Material:  Rigid Polyvinyl Chloride (PVC). 
    • Recommended adhesives:
      • Manus® 75-AM HV, Loctite® Power Grab® Ultimate (white formula only), Titebond® Titegrab Ultimate®, and Liquid Nails® Fuze It®
  • SHAPE, MASS, AND DIMENSIONS
    • Thickness: 
      • 5 mm (13/64 inches)
    • Available Sizes (nominal): Note– certain style panels may vary from nominal dimensions and you should always contact manufacture for dimensions.
  • Tiles – 5mm Tiles -5mm (48 inches x 17 inch) 5mm (48-inch x 120 inch) 5mm (16– inch x 120 inch) 5mm (60 – inch x 48 inch) 5mm (60 – inch x 24 – inch) (these are nominal dimensions, always consult with manufacture for exact dimensions) 
    •  FINISH, COLORS AND TEXTURES
    • Tiles – Colors:
    • Matte Finish – Colors: Balkan, Carpathian, Etna, Dolomite, Mont Blanc, and Olympus
    • Gloss Finish – Colors: Carpathian, Dolomite, Etna, Mont Blanc, and Olympus

PRODUCT PLACEMENT

  • PREPARATION WORK
    • Perform installation as late as possible in the building process after any dust-generating activities have been completed.
    • Install tiles in accordance with installation instructions.
  • INSTALLATION / ERECTION
    • Cutting Panels:  Using a table saw or circular saw for clean straight cuts and jig saw or hole saw for irregular cuts around plumbing or fixtures.
    • Surface Mounting:
      • Apply adhesive to substrate using a notched trowel.  If a tube adhesive is used, repeated pressing of tiles to substrate may be required.
      • Install full panels, working across the room.
      • Overlap tongue and grove tiles and build across the room
      • Once completed, firmly press all wall tiles to ensure proper adhesive bond.

    • Contact manufacturer for detailed installation guide.
  • MAINTENANCE INSTRUCTIONS AND PROCEDURES
    • Clean with mild soap and water.
    • On a daily basis, moderate dust or vacuum clean with a soft, clean brush attachment. (if necessary)
    • On a weekly basis, provide manual wet cleaning. (if necessary)

Corporate Identification

            Acoustic Ceiling Products, L.L.C.

            P.O. Box 1581

            Appleton, WI, U.S.A. 54912-1581

            Phone Toll Free:  1-800-434-3750

            Fax Toll Free:  1-800–434-3751

            Website: acpideas.com

            Email: customersupport@acpideas.com

Technical Services Available

Product available nationally and internationally or from regional representatives.

Classification and Filing

MasterFormat 1995

            Section 09510 – PVC Wall Panels

MasterFormat 2004

            Section 09 51 00 – PVC Wall Panels